controller-and-cable-600x600The Deeter Group is pleased to announce the newest addition to our range of Leak Detector Systems, the LKC-1500 Cable Leak Detector. Perfect for residential, commercial and industrial buildings, our new cable leak detector system is made up of an LKC-1500 controller as well as various lengths of sensing cable.

The LKC-1500 controller is able to identify a leak along the length of the sensing cable and has a variety of process outputs. These outputs include two SPDT relays to directly control mains powered pumps, valves or alarms, an open-collector transistor for connection to a programmable logic controller (PLC), building management system (BMS) or for indirectly driving further valves or pumps via an external relay and finally an RS485 serial communications port for remote monitoring. The controller is capable of detecting a broken or improperly terminated sensing cable, and the relay and transistor outputs can be assigned to respond to a leak or to a fault.

The length of sensing cable that can be used with each controller is between 15m and 1500m and the leak position is measured along this length of cable. An interconnecting cable can be used to connect two separate sensing cables together, giving users more flexibility when placing the cable.

For more information on this and other products from The Deeter Group, please contact us on (330) 915-6316 or via email at [email protected].

The Deeter Group is pleased to announce the release of the VFS-FP, our newest standard addition to our range of Explosion Proof Vertical Float Switches. The VFS-FP has been specifically designed for the control and indication of a liquid level whilst in a potentially explosive atmosphere.
The VFS-FP can be used in both high temperature and high pressure applications and is suitable for gas and dust environments. This Explosion Proof Level Sensor is made out of 316L Stainless Steel, with an M20 external mounting thread and a measuring length of 100mm, the sensor also has IP68 Ingress protection.
The VFS-FP holds ATEX & IECEx Ex d certification for use in hazardous areas in most regions worldwide.
Please note custom options are available. Options include: Probe length, Switch voltage, Switch point quantity, Switch point height, Threaded mounting/seal options, Reed/Hall Effect technology, float sizes, 8 or 12mm sensor tube, cable entry thread. For more information, please view the product page or contact us via email on [email protected] or via phone on (330) 915-6316.


Water damage is one of the most common types of property damage and preventing this can save property owners a lot of money in the long run. Our Intelligent Leak Detector Sensors are able to detect even the smallest amount of moisture and will send a signal to the Intelligent Leak Detector Controller. The Controller can identify each sensor and provide information about the location of any leak whenever a leak is detected. The controller also has a variety of outputs which may be used to directly drive pumps and alarms, or to interface with other equipment such as a Building Management System (BMS).

When used in conjunction with the deeternet® Wireless Gateway it allows the monitoring of up to 1200 Intelligent Leak Detector Sensors at any one time. This combination of two of our newest products will be instrumental in preventing water damage in many different types of building including, but not limited to:

  • Apartment Buildings
  • Offices
  • Hotels
  • Resorts
  • Villas
  • Care Homes
  • Warehouses
  • Factories
  • Care Homes

Using this configuration the Wireless Gateway can be connected to the internet in order to allow the user to actively monitor the current status of all Intelligent Leak Detector Sensors within their system. The system can also be configured to allow users to remotely access the Wireless Gateway sensor data and they can be notified via email or SMS of the location of any leak that has been found. This allows any leak to be responded to as quickly as possible, avoiding any critical water damage to the property.

For more information, please get in touch via email on [email protected] or give us a call on (330) 915-6316.

The Deeter Group is pleased to announce its newest range of products, the Deeter Intelligent Leak Detector System.
Perfect for residential, commercial and industrial buildings, our new Intelligent Leak Detector System is made up of an Intelligent Leak Detector Controller as well as Intelligent Leak Detector Sensors. Improving on the technology used in our current Leak Detector System, the new Intelligent Leak Detector System can identify the location of every single leak within the system.
The Intelligent Leak Detector Controller has a variety of outputs which can be used for a number of different functions such as controlling mains powered pumps, valves and alarms. The controller can also be connected to a programmable logic controller (PLC) or a building management system (BMS). These outputs can be independently assigned to respond to any leak or leaks within the system or alternatively they can be assigned to a fault condition.
Up to 80 Intelligent Leak Detector Sensors can be used in a system at any one time and the maximum cable length between sensors is approximately 200m, although an extra sensor can be added to act as a signal repeater for cable lengths greater than 200m.
For more information on this and other products from The Deeter Group, please contact us on (330) 915-6316 or via email at [email protected].

The Deeter Group manufactures three different types of liquid dispensers as part of its deeterflow range: the deeterflow Low Volume Liquid Dispenser, the deeterflow Liquid Volume Dispenser and the deeterflow Automatic Liquid Dispenser. This variety of dispensers that we offer allows them to be used in an array of different industries including but not limited to the pharmaceutical, food and beverage, automotive and chemical industries.

automatic-liquid-dispenser-600x600 liquid-volume-dispenser-600x600

The deeterflow Low Volume Liquid Dispenser can produce volumes between 0.025 litres and 10 litres, accurately measuring volumes over a flow rate range of between 0.2 and 2.5 litres/minute, and the deeterflow Liquid Volume Dispenser can produce volumes between 0.10 litres and 100.00 litres, accurately measuring volumes over a flow rate range of between 0.6 and 5 litres/minute. Both of these dispensers are gravity fed and designed to deliver a measured volume of liquid at the press of a button.

The deeterflow Automatic Liquid Dispenser can produce volumes between 0.20 litres and 100.00 litres and accurately measures volumes over a flow rate range of between 0.05 and 5 litres/minute. Our Automatic Liquid Dispenser is configured for simple operation – all the user has to do is select a volume, press a button and the dispenser will deliver the required volume with no further input required. The Automatic Liquid Dispenser offers many custom liquid dispensing options and can deliver fluids either by the press of a button, by an external input signal, or automatically by means of an internal timer which can be selected to start dispensing at regular intervals or start dispensing at set times of the day, on a daily or weekly basis.

The complete deeterflow range is fitted with John Guest Speedfit push-fit connectors for fluid in and out operations and each one can be calibrated to dispense a wide variety of fluids. The dispensers also have the ability to compensate for varying flow-rate and temperature, considerably reducing any measurement errors introduced by these two variables. USB connectivity is also provided on all of our dispensers allowing connection and interaction with a PC. Each dispenser is provided with a 12Vdc mains adapter allowing for low voltage operations, making it safe to use in damp environments or where liquids have been spilt.

For more information on this and other products from Deeter Electronics Ltd. please contact us on (330) 915-6316 or via email at [email protected].

fp-sensorsThe Deeter Group’s extensive expertise in the design and manufacture of Hazardous Area Liquid Level Sensors enables us to give you the advice and guidance that you require – ensuring that you receive the best solution when deciding how best to measure and control a liquid in a Hazardous Area. Our ATEX and IECEx certifications mean that we are able to offer a solution for most regions worldwide.

The Deeter Group can support you from the initial enquiry through to the design and manufacture of the ideal level sensor for your application. We can ensure that you select the most appropriate sensor and design it with the restrictions and specifics of your application in mind. We can offer a range of customisations including mounting types and thread options, and our certifications allow use across a broad range of temperatures, pressures and liquids.

Our LVCS-FP Ex d Continuous Vertical Level Sensor can be specified in lengths up to 4 metres dependent on the application and can be delivered with 0-2V, 0-5V, 0-10V or 4-20mA outputs. Our FS-FP Ex d Vertical Float Switch can be specified with stems up to 4 metres in length and up to 7 switch points on the stem, each of which can be either normally open or normally closed. For both sensors we are able to offer a variety of floats with different specific gravities dependent on the liquid. These flexible design options allow our sensors to be specified for a wide range of applications.

Popular applications for our Hazardous Area sensor range include the measurement and control of Oil, Petrol and various other liquids across industries including Petrochemical, Aerospace, Breweries and Marine.

Our custom sensors are designed and manufactured specifically for each customer but retain our competitive prices and fast lead times. Our specialism in bespoke liquid level sensors ensures that we can advise on the most suitable sensor for the application. All of The Deeter Group’s design and manufacturing operations take place at our UK headquarters in Buckinghamshire.

Other products

As well as our ability to design and manufacture custom ATEX and IECEx certified level sensors, The Deeter Group also has a large range of standard sensors such as our ATEX approved HFS FP range of horizontal level sensors. The HFS FP is available in multiple mounting configurations and can be used in potentially explosive atmospheres in conjunction with an intrinsically safe barrier.

With this ATEX approved level sensor you have a low cost option when your access to the liquid vessel is only from the side.

Deeter has gained certification for its new range of stainless steel, horizontally mounted float switches, approving their use in hazardous areas as part of an intrinsically safe system. The HFS FP is available in multiple mounting configurations and can be used in potentially explosive atmospheres in conjunction with an intrinsically safe barrier. For additional information or to discuss your specific requirements, please get in touch via email or phone on (330) 630-3510. Please click here to view our Hazardous Area range.

Deeter Electronics, Inc. is pleased to announce its newest product, the deeterflow® Automatic Liquid Dispenser pump and dispenser system.
Perfect for labs, food processing facilities or any small to medium volume production line, it is easy to use and can pump and dispense volumes between 0.20 liters and 100 liters in increments of .01 liters, at a nominal flow rate of 3.2 liters per minute. Volumes can be changed quickly and accurately repeated as often as desired. At a fraction of the cost of other dispensing systems, it is versatile, self-contained and portable. You can quickly take it where you need it and have it set up and operating in seconds.

Other features are a three pin circular connector to allow for triggering by an external device such as a foot pedal and a USB port to allow for automated control and monitoring, using the PC software included in the package. It also comes with its own 12 VDC adapter that can be plugged into any standard 110 VAC outlet for safe, low voltage operation.

For more information on this and other products from Deeter Electronics, Inc. please contact us on (330) 630-3510 or via email at [email protected].


The deeternet® Wireless Gateway allows the wireless viewing of data from up to 200 sensors using a web browser.

Ethernet connected, the deeternet® Wireless Gateway provides a user friendly web interface which gives easy access to sensor data at a glance. Customisable set points can be programmed to trigger email and SMS alerts.

It offers Plug and Play operation with supported deeternet® wireless hardware which communicates using the robust and secure IEEE 802.15.4 industrial wireless communication protocol, and our deeternet® Wireless Sender allows connection to most 3rd-party sensors.

For further information or to register your interest, please email [email protected] or visit

dlc-600x600The Deeter Group Dual Level Controller is a cost effective solution for the control of pumps and valves.

It enables the control of the liquid level in a tank between two or three set points. The pump or valve is controlled by integrated high power relay contacts.

The Dual Level Controller 2 has an additional relay which can be used for any purpose – such as a low level cut off valve or a high level alarm output. An IP65 version is also available.

Deeter manufactures a large range of float switches that are compatible with the Dual Level Controller.