Big Boiler Management Technology for Domestic and Small Commercial Boilers
The Benefits of the Boiler Manager
– Energy saving, up to 20% fuel saving
– 24 – 36 month payback
– Suitable for most gas – or oil-fired boilers
– Not simply a time delay unit
– No loss of comfort
– Quick, easy no mess installation
– Assisting with HECA and environmental targets by reducing CO2 emissions
– 3 year warranty
– CE marked and manufactured to ISO 9000 standards
How does the Boiler Manager work?
A typical boiler system
Boilers are unintelligent and often fire up unnecessarily, when there is still sufficient heat within the system. When this happens the boiler is re-heating water that is sufficiently hot and the excess heat is wasted up the boiler flue; this is called dry cycling. In a typical system, the boiler is designed to work most efficiently with an 11°C difference between the flow and return water temperatures (e.g. out at 66°C and back at 55°C). The boiler setting is fixed and usually set to cater for the coldest external temperatures.
A system controlled by The Boiler Manager
Anti-cycling technology is well established in the large commercial boiler market place, but the Boiler Manager is one of the first systems to successfully apply this technology at a price that makes it viable for domestic or small commercial boilers. In contrast with a typical boiler system, the Boiler Manager is a much more efficient energy saving system.
The Boiler Manager is wired between the time clock and the room thermostat, with sensors on both flow and return pipes, and takes over the management of the boiler to run it more efficiently. It has high performance microprocessor control and its own exclusive software, which was written specifically to overcome the shortcomings of existing boiler control unit technology as identified in numerous Building Research Establishment (BRE) reports. The Boiler Manager is not controlled by time, but by temperature, and so is able to prevent dry cycling without loss of comfort.
The Boiler Manager monitors flow and return and varies the threshold settings and firing cycle in order to achieve genuine energy saving. The return temperature is used to determine when to reduce the boiler setting and when to extend the firing cycle, without affecting comfort levels. The Boiler Manager will not allow the boiler to fire up until the return temperature has dropped fully to the required temperature. It is a basic principle of Thermodynamics, that if the return temperature is reduced, then the boiler heat exchanger will operate more efficiently, therefore being a more efficient energy saver.
The charts below monitor the running of a typical domestic boiler with and without the boiler manager controlling the system. Two conclusions are immediately evident:
– The boiler fires 17 times in a minute period without the boiler manager and 7 times with the boiler manager.
– The Boiler Manager ensures that the boiler is operating precisely to the set demand temperature of 66 degrees Celsius, without loss of comfort; this is very different to the situation without the Boiler Manager, where the system temperature is at 78 degrees Celsius, resulting in dry cycling and wasted heat.
WHEN TO INSTALL THE DEETER BOILER MANAGER
– As part of a basket of measures under government grant schemes such as HEES
– During heating system installation or refurbishment contracts
– As part of HECAction grant
– Promotion to private householders as part of a HECA strategy
– Whenever refurbishment, energy efficiency or decoration contracts are carried out